From: Nico van Niekerk (nico@vanniekerk.co.za)
Date: Thu Dec 02 2004 - 06:49:10 GMT-3
With 'privilege exec level 0 show' you still have to specify which show
commands he can do.
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Lee Donald
> Sent: Thursday, 2 December 2004 7:42 PM
> To: ccie zeng; ccielab@groupstudy.com
> Subject: RE: user privilege level
>
>
> Are you logging in as Bob? I don't see a login local command
> under the VTY.
>
>
>
> -----Original Message-----
> From: ccie zeng [mailto:ccie.candidate@gmail.com]
> Sent: 02 December 2004 08:23
> To: ccielab@groupstudy.com
> Subject: user privilege level
>
> Hi:
> I could not make this work, could anyone help me out?
>
> there is a user bob with password cisco, he can only allow to execute
> show commands, I have done following
>
> enable password tom
> username bob privilege 0 password cisco
> privilege exec level 0 show
>
> line vty 0 4
> privilege 0
>
> But when I try to telnet to this router
>
> I am still be able to do all the commands, and "show privilege" shows
> I have level 15, why is that? how can I achieve that?
>
> Thanks
> Wei
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:23 GMT-3