From: John Matus (jmatus@pacbell.net)
Date: Wed Dec 01 2004 - 05:24:38 GMT-3
true......authentication could work, and i guess you could also use the
'isdn caller' or 'dialer caller' command and specify 111-1111 as the only
number to accept....
Regards,
John D. Matus
MCSE, CCNP
Office: 818-782-2061
Cell: 818-430-8372
jmatus@pacbell.net
----- Original Message -----
From: "Hai Minh" <minh@ipmac.com.vn>
To: "Tomikawa" <h-tomikawa@syscomusa.com>; <ccielab@groupstudy.com>
Sent: Tuesday, November 30, 2004 11:51 PM
Subject: Re: dial up command for only callout
> Hi,
>
> I don't know any command to do it, but I think I will use authentication
> to
> drop incoming call :-)
>
> HTH, Hai Minh
>
> ----- Original Message -----
> From: "Tomikawa" <h-tomikawa@syscomusa.com>
> To: <ccielab@groupstudy.com>
> Sent: Wednesday, December 01, 2004 7:35 AM
> Subject: dial up command for only callout
>
>
>> Hi, all.
>>
>> Is there any command for "interface bri x" or "interface dialer x" to
>> make only call out, but it doesn't accept incoming call?
>>
>> Thanks in advance.
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:23 GMT-3