Frame Switch HSSI Crossover

From: Scott Thornton (scthornton@gmail.com)
Date: Tue Nov 30 2004 - 19:25:38 GMT-3

I am having issues getting a PVC working that is mapped between a
frame switch and router and is crossing two hssi interfaces. I don't
have issues with serial connections.

Has anyone run across this before? My configs are below...

Router 1 --1-- (FRC) --2-- Router(FRS) --3-- Router2

Router 1 is a 7507
--1-- is a Frame Relay T
FRC is the Frame Relay Cloud
--2-- is a DS3 Frame Relay
Router(FRS) is a 7206VXR acting as a Frame Switch
--3-- is a hssi crossover
Router 2 7507

Router 1 configuration
!
interface Serial5/1/0
description
no ip address
encapsulation frame-relay
ip route-cache flow
no ip mroute-cache
serial restart-delay 0
end

interface Serial5/1/0.18 point-to-point
description
ip address 192.168.0.1 255.255.255.252
frame-relay interface-dlci 400
end

Router 2 configuration

interface Hssi0/0/0
description no ip address
encapsulation frame-relay
no ip route-cache
no ip mroute-cache
no keepalive
serial restart-delay 0
!
interface Hssi0/0/0.1 point-to-point
description
ip address 192.168.0.2 255.255.255.252
no ip route-cache
no ip mroute-cache
frame-relay interface-dlci 214

Router FRS Configuration

interface Hssi1/1
description crossover
no ip address
encapsulation frame-relay
no ip route-cache
no ip mroute-cache
no keepalive
hssi internal-clock
hssi dce
serial restart-delay 0
clockrate 45000
frame-relay intf-type dce
frame-relay route 214 interface Hssi4/1 214

interface Hssi4/1
description
no ip address
encapsulation frame-relay
no ip route-cache
 frame-relay route 214 interface Hssi1/1 214 

-- 
Scott C Thornton

Notice: This e-mail (including attachments) is covered by the Electronic
Communications Privacy Act, 18 U.S.C. 2510-2521, is confidential and may be
legally privileged.  If you are not the intended recipient, you are hereby
notified that any retention, dissemination, distribution, or copying of this
communication is strictly prohibited.  Please reply to the sender that you
have received the message in error, then delete it.  Thank you.

This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:51 GMT-3