From: Kevin (h_kvn@yahoo.com)
Date: Sat Nov 13 2004 - 18:34:56 GMT-3
Tim,
Named ACLs can only be used in certain situations
(Packet and Route filters only):
"You can identify IP access lists with an alphanumeric
string (a name) rather than a number. Named access
lists allow you to configure more IP access lists in a
router than if you were to use numbered access lists.
If you identify your access list with a name rather
than a number, the mode and command syntax are
slightly different. Currently, only packet and route
filters can use a named list."
Kevin
--- ccie2be <ccie2be@nyc.rr.com> wrote:
> Hi guys,
>
> I prefer to use named acl's whenever possible. But,
> as I do practice labs, I
> sometimes find that after I've created the named acl
> and go to apply it,
> that's not allowed. I have to still use a numbered
> acl. And, I'm always
> annoyed when that happens. I bet this happens to
> others as well.
>
> Off hand, I can list 2 places named acl's aren't
> allowed.
>
> 1) On vty lines with the access-class command
>
> 2) When defining interesting traffic for isdn in
> the dialer-list command.
>
>
> I know there are other places which still don't
> allow named acl's, but I can't
> think of them at the moment.
>
> Besides the 2 instances above, does anybody know
> where else named acl's can't
> be used?
>
> Thanks, Tim
>
>
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:43 GMT-3