Passive Interface on Async Line

From: Joe Rinehart (jjrinehart@hotmail.com)
Date: Tue Nov 09 2004 - 13:35:49 GMT-3

• Next message: Joe Rinehart: "Re: Passive Interface on Async Line"
• Previous message: Edwards, Andrew M: "RE: dhcp and address negotiation over an isdn link"
• Next in thread: Joe Rinehart: "Re: Passive Interface on Async Line"
• Maybe reply: Joe Rinehart: "Re: Passive Interface on Async Line"
• Maybe reply: wing_lam@jossynergy.com: "Re: Passive Interface on Async Line"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Need some insight...

I have a back to back async connection between 2 routers in my pod that has
ip connectivity just fine but the routing protocol is showing up as passive
no matter what I do. Here is the configuration:

interface Async1
 ip unnumbered Loopback0
 encapsulation ppp
 async dynamic routing
 async mode dedicated
 cdp enable
!
router ospf 1
 router-id 172.16.102.1
 log-adjacency-changes
 network 172.16.102.0 0.0.0.255 area 0
!

line aux 0
 exec-timeout 0 0
 modem InOut
 transport input all
 flowcontrol hardware

any insight here???

• Next message: Joe Rinehart: "Re: Passive Interface on Async Line"
• Previous message: Edwards, Andrew M: "RE: dhcp and address negotiation over an isdn link"
• Next in thread: Joe Rinehart: "Re: Passive Interface on Async Line"
• Maybe reply: Joe Rinehart: "Re: Passive Interface on Async Line"
• Maybe reply: wing_lam@jossynergy.com: "Re: Passive Interface on Async Line"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:40 GMT-3