STP issue - bridging over Frame Relay

From: Narcis Micsoniu (micsoniu@telus.net)
Date: Sat Nov 06 2004 - 22:57:16 GMT-3

• Next message: Matthew Seppeler: "RE: STP issue - bridging over Frame Relay"
• Previous message: joshua lauer: "Re: CCIE Voice Written materials"
• Next in thread: Matthew Seppeler: "RE: STP issue - bridging over Frame Relay"
• Maybe reply: Matthew Seppeler: "RE: STP issue - bridging over Frame Relay"
• Maybe reply: Narcis Micsoniu: "RE: STP issue - bridging over Frame Relay"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Internetwork Expert Lab 16 - Task 2.5 - 2.7

I think have an issue with STP:

R1 - E0/0 connected to SW1-Fa0/1 (VLAN16)
R2 - E0/0 connected to SW1-Fa0/2 (VLAN22)

Also, by using trunking:
 R6 - Fa1/0.16 <-> SW1- Fa0/6 (VLAN 16)
 
And
BB2 - <-> SW1- Fa0/24 (VLAN 22)

As soon as the bridge comes up over the FR link, you cannot ping R6 from R1
and BB1 from R2 (and vice-versa).

I have looked at the STP status and SW1's FastEthernet ports connected to R1
and R2 are in blocking mode....

Did anybody experience something similar ?

Thank you

Narcis

[GroupStudy removed an attachment of type application/ms-tnef which had a name of winmail.dat]

• Next message: Matthew Seppeler: "RE: STP issue - bridging over Frame Relay"
• Previous message: joshua lauer: "Re: CCIE Voice Written materials"
• Next in thread: Matthew Seppeler: "RE: STP issue - bridging over Frame Relay"
• Maybe reply: Matthew Seppeler: "RE: STP issue - bridging over Frame Relay"
• Maybe reply: Narcis Micsoniu: "RE: STP issue - bridging over Frame Relay"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:39 GMT-3