From: Scott Morris (swm@emanon.com)
Date: Sat Nov 06 2004 - 20:49:40 GMT-3
Per RFC 2166 (latest), the answer is yes.
Low IP tcp 11xxx to high IP port 2065. Either side udp port 0 to udp port
2067 for canureach type questions.
FST is an IP protocol type, and therefore doesn't have a port number.
HTH,
Scott Morris, MCSE, CCDP, CCIE4 (R&S/ISP-Dial/Security/Service Provider)
#4713, JNCIP, CCNA-WAN Switching, CCSP, Cable Communications Specialist, IP
Telephony Support Specialist, IP Telephony Design Specialist, CISSP
CCSI #21903
swm@emanon.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Cisco Net
Sent: Saturday, November 06, 2004 6:42 PM
To: ccielab@groupstudy.com
Subject: dlsw port numbers fot tcp and fst encaps
What are the port numbers used for DLSW in TCP and FST encapsulations.
I know that TCP 2065 used for TCP but does it also have UDP explorer packets
?
Please list out the TCP and FST port numbers incase i need to show those
traffic as uninterested for ISDN.
Thank you
Cert.
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:39 GMT-3