From: Scott Morris (swm@emanon.com)
Date: Mon Nov 01 2004 - 10:08:47 GMT-3
In 12.1, the percentage was calculated based on interface bandwidth, allowed
to a max additive value of 75%.
In 12.2, this was changed to calculate based on "available bandwidth", which
was a pre-calculated value of 75% of the line bandwidth. So you could
reserve 100% of this amount.
HTH,
Scott Morris, MCSE, CCDP, CCIE4 (R&S/ISP-Dial/Security/Service Provider)
#4713, JNCIP, CCNA-WAN Switching, CCSP, Cable Communications Specialist, IP
Telephony Support Specialist, IP Telephony Design Specialist, CISSP
CCSI #21903
swm@emanon.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Swaroop Potdar
Sent: Monday, November 01, 2004 6:16 AM
To: ccielab@groupstudy.com
Subject: CBWFQ Percentage Calculation Doubt
Hi Group,
I wanted to confirm this doubt about CBWFQ,
-----------------
If in a question the default queue size to be used is not given
then;
do we have to do the bandwidth calculation without factoring the
max-reserved-bandwidth.
and if the default queue size for the traffic is given
then
we have to do the bandwidth percentage calculation as 100% of the interface
bandwidth
?????
Regards,
Swaroop
------------------------------------------------------------------
Life Is Short & Sweet.
Live It To The Fullest.
------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:37 GMT-3