From: nettable_walker (nettable_walker@hotmail.com)
Date: Fri Oct 22 2004 - 18:57:30 GMT-3
why bother with all the aggravation ?
just go router to router & do it the right way.
R
----- Original Message -----
From: "Hoyle, Anthony (AL)" <ALHoyle@dow.com>
To: "'Mestdagh, Mark [NCSBE - Non JJ]'" <MMESTDAG@ncsbe.jnj.com>;
<ccielab@groupstudy.com>
Sent: Friday, October 22, 2004 4:11 PM
Subject: RE: LS1010 - Router
> That's a good question. What will activate the other end of the PVC. I
> have configured a 1010 from scratch
> (sorta like a frame-relay switch) but I can't remember anything like that.
> You will need another router.
> I guess the thinking would be to make the 1010 act as a Backbone
> router...I
> believe when you configure the
> ATM device you are switching traffic from one interface to the other.
>
> Nope
>
> I don't think you can do it....but someone might chime in on this one
>
> Final answer :)
>
>
>
> Anthony Hoyle, CCIE #13948
> EDS
> Infrastructure Specialist
> anthony.hoyle@eds.com
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Mestdagh, Mark [NCSBE - Non JJ]
> Sent: Friday, October 22, 2004 3:53 PM
> To: 'ccielab@groupstudy.com'
> Subject: LS1010 - Router
>
>
> Hi
>
> I've been looking for this on the net and archives but nothing to find. Is
> it possible to setup a PVC between a Router with atm module and a LS1010?
> Just that I don't have a second router with atm :)
>
> Thx
> Mark
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:51 GMT-3