From: ccie2be (ccie2be@nyc.rr.com)
Date: Sun Oct 17 2004 - 18:03:35 GMT-3
Hey John,
Could you post your config's?
Off-hand, the 1 thing that comes to mind is that if the routers were
config'd with "no fram inv", then the local router would send out inverse
arp requests, but the remote routers wouldn't respond.
----- Original Message -----
From: "John Matus" <jmatus@pacbell.net>
To: "lab" <ccielab@groupstudy.com>
Sent: Sunday, October 17, 2004 3:32 PM
Subject: weird inverse-arp problem
> i was setting up a frame network w/ inverse-arp <lab scenario> and had
enabled
> frame-relay encapsulation on the natural interfaces and waited to see the
> dynamic mappings come to life, but nothing. so after 10 minutes i decided
to
> use the 'frame interface dlci' command on the interfaces and viola, the
> mapping instantly came up.....
> from my understanding this is not supposed to be necessary to form dynamic
> pvc's........or am i wrong???
>
>
> Regards,
>
> John D. Matus
> MCSE, CCNP
> Office: 818-782-2061
> Cell: 818-430-8372
> jmatus@pacbell.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:48 GMT-3