From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Sun Oct 17 2004 - 00:38:41 GMT-3
You should see two virtual access instances, one per connection. These
are the interfaces that are multilinked together via the multilink
interface.
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Cisco Net
> Sent: Saturday, October 16, 2004 5:50 PM
> To: ccielab@groupstudy.com
> Subject: Lab 8 Frame-Relay with PPP and virtual template(s)
>
> Hi
> Clarification about the show ppp multilink command output on 2.5-28
> section.
> It was showed as the bundle showing 2 active participants.
>
> On the solution guide both serial interfaces are associated with same
> virtual-template interface (1). But show pp multink showing as 2 parti
> cipants on the bundle which i am not able to see on my routers,
>
> Rack1R3#sh pp mult
>
> Multilink1, bundle name is Rack1R2
> Bundle up for 00:34:32
> 0 lost fragments, 0 reordered, 0 unassigned
> 0 discarded, 0 lost received, 1/255 load
> 0x0 received sequence, 0x5 sent sequence
> Member links: 1 active, 3 inactive (max not set, min not set)
> Vi1, since 00:34:32, no frags rcvd, 375000 weight, 1496 frag size
> --> Only one
> Vt1 (inactive)
> Vi2 (inactive)
> Vt2 (inactive)
>
> But when i configure each interface pointing to seperate Virtual
> templates which make more sens,
>
> Rack1R3#sh ppp mult
>
> Multilink1, bundle name is Rack1R2
> Bundle up for 00:02:36
> 0 lost fragments, 0 reordered, 0 unassigned
> 0 discarded, 0 lost received, 1/255 load
> 0x0 received sequence, 0x0 sent sequence
> Member links: 2 active, 2 inactive (max not set, min not set)
> Vi1, since 00:02:36, no frags rcvd, 375000 weight, 1496 frag size
> Vi2, since 00:01:25, no frags rcvd, 375000 weight, 1496 frag size
> Vt1 (inactive)
> Vt2 (inactive)
>
>
> I am not sure the expectation when we have 2 serials pointing to the
> same virtual templats and solution guide showing 2 participants even
> though the single virtual template used to associate from serial
> interfaces.
>
> Please verify if mine is wrong.
> Reards
> Cert
>
>
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:48 GMT-3