From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Wed Oct 13 2004 - 15:15:28 GMT-3
Have you tried these various combinations? See what happens when
authentication is not enabled on the main interface, or pap
authentication is not enabled on the second dialer.
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Cisco Net
> Sent: Wednesday, October 13, 2004 1:01 PM
> To: Brian McGahan
> Cc: ccielab@groupstudy.com
> Subject: Re: IE Lab 9 ISDN 4.13
>
> Hi
> Thank you Brian.
> 1) Why do we turned on ppp authentication pap for the new ISDN profile
>
> 2) Why did you turned PPP authentication on the BRI interface, would
> it be only required on the new dialer interface ?
> 3)
>
> Regards
> Cert
>
> On Wed, 13 Oct 2004 09:48:06 -0400, Brian McGahan
> <bmcgahan@internetworkexpert.com> wrote:
> > The dialer interface is in backup, not the BRI interface. What
> > specifically don't you understand about the section?
> >
> > Brian McGahan, CCIE #8593
> > bmcgahan@internetworkexpert.com
> >
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com
> > Toll Free: 877-224-8987 x 705
> > Outside US: 775-826-4344 x 705
> > 24/7 Support: http://forum.internetworkexpert.com
> > Live Chat: http://www.internetworkexpert.com/chat/
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
Behalf
> > Of
> > > Cisco Net
> > > Sent: Wednesday, October 13, 2004 1:23 AM
> > > To: ccielab@groupstudy.com
> > > Subject: IE Lab 9 ISDN 4.13
> > >
> > > I am not able to understand this second dialer interface concept.
> > > Especialy since the main BRI interface is standby mode (back up)
to
> > > the fraimrelay interface.
> > >
> > > Even if the interesting traffic (ICMP) hit on the new dialer
> > > interface, how does the call will open when the bri interface is
on
> > > standby...
> > >
> > > Please help me with this...
> > >
> > > By the way my new dialer interface is not getting activated when i
> > > ping the ip address on the other side (section 4.13)
> > > R4:
> > > interface Dialer100 --------------> Second interface for 4.13
secton
> > > ip address 10.45.45.4 255.255.255.0
> > > encapsulation ppp
> > > dialer pool 1
> > > dialer remote-name Rack1R5
> > > dialer string 4370443
> > > dialer-group 10
> > > ppp authentication pap
> > > ppp chap refuse
> > >
> > > interface BRI3/0
> > > no ip address
> > > encapsulation ppp
> > > load-interval 30
> > > dialer pool-member 1
> > > isdn switch-type basic-ni
> > > isdn spid1 4082436155
> > > ppp authentication chap pap
> > > ppp pap sent-username Rack1R4 password 0 CISCO
> > > ppp multilink
> > >
> > > access-list 111 permit icmp host 10.45.45.4 host 10.45.45.5
> > > dialer-list 10 protocol ip list 111
> > >
> > > R5:
> > >
> > > interface Dialer100 -------------> Second interface for 4.13
secton
> > > ip address 10.45.45.5 255.255.255.0
> > > encapsulation ppp
> > > dialer pool 1
> > > dialer remote-name Rack1R4
> > > dialer-group 11
> > > ppp authentication pap
> > > ppp chap refuse
> > >
> > > interface BRI2/0
> > > no ip address
> > > encapsulation ppp
> > > dialer pool-member 1
> > > isdn switch-type basic-ni
> > > isdn spid1 4084370443
> > > ppp authentication chap pap
> > > ppp pap sent-username Rack1R4 password 0 CISCO
> > > ppp multilink
> > >
> > > access-list 111 permit icmp host 10.45.45.5 host 10.45.45.4
> > > dialer-list 10 protocol ip list 111
> > > Thank you
> > > Cert.
> > >
> > >
> >
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:47 GMT-3