From: Abdul Waheed Ghaffar (a_w_ghaffar@hotmail.com)
Date: Mon Oct 04 2004 - 12:32:59 GMT-3
Im little bit confused, can we open sessions from diffrent source
applications ( here BGP and telnet ) on same target port at destination IP
at the same time?
>From: "Hoonpongsimanont, Chalermchai"
><chalermchai.hoonpongsimanont@atosorigin.com>
>Reply-To: "Hoonpongsimanont, Chalermchai"
><chalermchai.hoonpongsimanont@atosorigin.com>
>To: "Brant I. Stevens" <branto@branto.com>, ccielab@groupstudy.com
>Subject: RE: Terminal Server Problem
>Date: Mon, 4 Oct 2004 22:21:26 +0700
>
>Hi,
>
>Thanks for the input. Here's what happen..
>
>r2#telnet 10.1.1.1 179
>Trying 10.1.1.1, 179 ... Open
>
>
>exit
>quit
>^C^C^C
>^]^]
>## Send break here ##
>TermServ#disc
>Closing connection to r2 [confirm]
>TermServ#r2
>Trying r2 (192.168.1.253, 2002)... Open
>
>
>
>
>adfkj
>
>ff
>^C^C^C
>^@^X^@
>
>Looks like I still have hanged telnet session ..
>
>Cheers,
>David
>-----Original Message-----
>From: Brant I. Stevens [mailto:branto@branto.com]
>Sent: Monday, October 04, 2004 10:18 PM
>To: Hoonpongsimanont, Chalermchai; ccielab@groupstudy.com
>Subject: Re: Terminal Server Problem
>
>Send a break and type disconnect.
>
>CTRL+SHIFT+6+X "disc (enter)
>
>
>On 10/04/2004 11:03 AM, "Hoonpongsimanont, Chalermchai"
><chalermchai.hoonpongsimanont@atosorigin.com> wrote:
>
> > Hi,
> >
> >
> >
> > Thank you for your time reading my problem. Today, during lab practice,
>I
> > got this problem with terminal server.
> >
> >
> >
> > I have a terminal server connected to R1 and R2 console.
> >
> >
> >
> > R1 ---- R2
> >
> >
> >
> > R1
> >
> > !
> >
> > interface FastEthernet0/0
> >
> > ip address 10.1.1.1 255.255.255.0
> >
> > duplex auto
> >
> > speed auto
> >
> > !
> >
> > router bgp 1
> >
> > no synchronization
> >
> > bgp log-neighbor-changes
> >
> > neighbor 10.1.1.2 remote-as 1
> >
> > no auto-summary
> >
> > !
> >
> >
> >
> >> From R2, I try to configure BGP to peer with R1. Somehow, I cannot
>manage
> > BGP peer to up. So, from R2 console, I tried telnet 10.1.1.1 179 to
>check
> > whether I can open a TCP session to BGP port.
> >
> >
> >
> > r2#telnet 10.1.1.1 179
> >
> > Trying 10.1.1.1, 179 ... Open
> >
> >
> >
> >
> >
> > exit
> >
> > quit
> >
> > ^C^C^C
> >
> > ^]^]
> >
> >
> >
> > .. I stuck here, cannot close this telnet session and lost my console
> > connection to R2. I also cannot telnet to R2 because I haven't set vty
> > password. What I need to do is power cycle R2. Any idea if we have this
> > problem in real lab is appreciated. Thank you.
> >
> >
> >
> > Cheers,
> >
> > David
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:42 GMT-3