From: Brant I. Stevens (branto@branto.com)
Date: Mon Oct 04 2004 - 12:26:43 GMT-3
OK, try sending the break twice...
CTRL+SHIFT+6+X
CTRL+SHIFT+6+X "disc" (enter)
In the future, you can just use a show tcp to see the TCP ports that are
open on a router.
On 10/04/2004 11:21 AM, "Hoonpongsimanont, Chalermchai"
<chalermchai.hoonpongsimanont@atosorigin.com> wrote:
> Hi,
>
> Thanks for the input. Here's what happen..
>
> r2#telnet 10.1.1.1 179
> Trying 10.1.1.1, 179 ... Open
>
>
> exit
> quit
> ^C^C^C
> ^]^]
> ## Send break here ##
> TermServ#disc
> Closing connection to r2 [confirm]
> TermServ#r2
> Trying r2 (192.168.1.253, 2002)... Open
>
>
>
>
> adfkj
>
> ff
> ^C^C^C
> ^@^X^@
>
> Looks like I still have hanged telnet session ..
>
> Cheers,
> David
> -----Original Message-----
> From: Brant I. Stevens [mailto:branto@branto.com]
> Sent: Monday, October 04, 2004 10:18 PM
> To: Hoonpongsimanont, Chalermchai; ccielab@groupstudy.com
> Subject: Re: Terminal Server Problem
>
> Send a break and type disconnect.
>
> CTRL+SHIFT+6+X "disc (enter)
>
>
> On 10/04/2004 11:03 AM, "Hoonpongsimanont, Chalermchai"
> <chalermchai.hoonpongsimanont@atosorigin.com> wrote:
>
>> Hi,
>>
>>
>>
>> Thank you for your time reading my problem. Today, during lab practice, I
>> got this problem with terminal server.
>>
>>
>>
>> I have a terminal server connected to R1 and R2 console.
>>
>>
>>
>> R1 ---- R2
>>
>>
>>
>> R1
>>
>> !
>>
>> interface FastEthernet0/0
>>
>> ip address 10.1.1.1 255.255.255.0
>>
>> duplex auto
>>
>> speed auto
>>
>> !
>>
>> router bgp 1
>>
>> no synchronization
>>
>> bgp log-neighbor-changes
>>
>> neighbor 10.1.1.2 remote-as 1
>>
>> no auto-summary
>>
>> !
>>
>>
>>
>>> From R2, I try to configure BGP to peer with R1. Somehow, I cannot manage
>> BGP peer to up. So, from R2 console, I tried telnet 10.1.1.1 179 to check
>> whether I can open a TCP session to BGP port.
>>
>>
>>
>> r2#telnet 10.1.1.1 179
>>
>> Trying 10.1.1.1, 179 ... Open
>>
>>
>>
>>
>>
>> exit
>>
>> quit
>>
>> ^C^C^C
>>
>> ^]^]
>>
>>
>>
>> .. I stuck here, cannot close this telnet session and lost my console
>> connection to R2. I also cannot telnet to R2 because I haven't set vty
>> password. What I need to do is power cycle R2. Any idea if we have this
>> problem in real lab is appreciated. Thank you.
>>
>>
>>
>> Cheers,
>>
>> David
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:42 GMT-3