Re: Route map permit statements

From: James (james@towardex.com)
Date: Thu Sep 30 2004 - 11:58:18 GMT-3


On Thu, Sep 30, 2004 at 10:24:34AM -0400, Drew Whitaker wrote:
> Here's a generic route-map:
>
> route-map MYMAP permit 10
> match ip address 1
> set ip next-hop 1.1.1.1
>
> In some examples I see an additional line after this that reads:
> route-map MYMAP permit 20
>
> When do you know if you need the additional permit line?

Because anything that did not match in "permit 10" line will get dropped
/ denied.

-J

-- 
James Jun                                            TowardEX Technologies, Inc.
Technical Lead                        Network Design, Consulting, IT Outsourcing
james@towardex.com                  Boston-based Colocation & Bandwidth Services
cell: 1(978)-394-2867           web: http://www.towardex.com , noc: www.twdx.net


This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:51 GMT-3