Multicast Configuration

From: Vesselin Kostov (V.Kostov@cnsys.bg)
Date: Sat Sep 25 2004 - 10:22:05 GMT-3

• Next message: Drew Whitaker: "Vegesna's IP QoS Book (rate-limits)"
• Previous message: Jeff K.: "RE: Has anybody here let their CCIE re-cert deadline pass?"
• Next in thread: Kian Wah, Lai: "RE: Multicast Configuration"
• Maybe reply: Kian Wah, Lai: "RE: Multicast Configuration"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello,

I have the following setup:

Ring topology:
R1 has two serial connections to ser 0 of R2 and ser 0 of R3.
R4 has two serial connections to ser 1 of R2 and ser 1 of R3.

I have to configure static RP - lo0 of R4 for group 239.255.8.8
And the hosts on the Ethernet side of R1 should be able to receive
multicast traffic without configuring ip pim an any of the interfaces of
R2 or R3.
There is no direct connection between R1 and R4
How can I do that?

Vince

###########################################

This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.

###########################################
.

• Next message: Drew Whitaker: "Vegesna's IP QoS Book (rate-limits)"
• Previous message: Jeff K.: "RE: Has anybody here let their CCIE re-cert deadline pass?"
• Next in thread: Kian Wah, Lai: "RE: Multicast Configuration"
• Maybe reply: Kian Wah, Lai: "RE: Multicast Configuration"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:49 GMT-3