FW: Serial 2/1:0 is reset, line protocol is down

From: Sharma Sham Sunder (vMoksha) (ShamSunder.Sharma@UCB-Group.com)
Date: Thu Sep 23 2004 - 13:35:38 GMT-3


This is interface config.there is no config done on the Serial2/1

interface Serial2/1:0
 description ### LEASED LINE 1536KB TO BIRMINGHAM ###
 bandwidth 1536
 ip address 192.192.192.30 255.255.255.252
 ip accounting output-packets
 down-when-looped
 no cdp enable

CSATLANTA1#sh int serial 2/1:0
Serial2/1:0 is reset, line protocol is down
  Hardware is DSX1
  Description: ### LEASED LINE 1536KB TO CSBIRMINGHAM ###
  Internet address is 192.168.254.13/30
  MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation HDLC, loopback not set
  Keepalive set (10 sec)
  Last input 00:26:35, output 00:26:33, output hang never
  Last clearing of "show interface" counters 00:09:57
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 80
  Queueing strategy: weighted fair
  Output queue: 0/1000/64/0 (size/max total/threshold/drops)
     Conversations 0/30/256 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
     Available Bandwidth 1152 kilobits/sec
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     0 packets input, 0 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 collisions, 20 interface resets
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions
  Timeslot(s) Used:1-24, Transmitter delay is 0 flags
CSATLANTA1#

Hi

Can someone explain why i am getting it like this ..

Serial 2/1:0 is reset, line protocol is down

Thanks&Regards

---------------------------------------------------------
Legal Notice: This electronic mail and its attachments are intended solely
for the person(s) to whom they are addressed and contain information which
is confidential or otherwise protected from disclosure, except for the
purpose they are intended to. Dissemination, distribution, or reproduction
by anyone other than their intended recipients is prohibited and may be
illegal. If you are not an intended recipient, please immediately inform the
sender and send him/her back the present e-mail and its attachments and
destroy any copies which may be in your possession.
---------------------------------------------------------



This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:47 GMT-3