From: Peter Ding (pding@cisco.com)
Date: Tue Sep 21 2004 - 03:42:46 GMT-3
The requiement is to configure the sw1 and sw2 such that you will have the
traffic related to vlan_100 pass primarily through fa0/15 trunk port
........(pg. 371)
The solution on pg. 371 is the use of spanning-tree vlan port-priority
command on both sides (both trunks).
My question is why it need to be configured on both sides. If I configure it
only on sw1, will it still work?
PD
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:46 GMT-3