From: James (james@towardex.com)
Date: Fri Sep 17 2004 - 01:58:12 GMT-3
On Thu, Sep 16, 2004 at 09:50:27PM -0700, Anand Singh wrote:
> That optiona is not available in ospf. If you have more than one ABR
> then you may configure 'area x range' on one router and leave other ABR
> routers as such,..that can have both component and summary avl. Other
> option could be configure 'area range' for component routes also and
> that way you have both avl from a single ABR.
I agree..
Then your specific routes are carried to another router, which may or
may not pose a problem dependent on the network topology.
I tend to find that link state protos like OSPF, ISIS have smaller
methods to hack around w/ route engineering than vector based
protocols such as BGP, RIP, EIGRP, etc.
-J
-- James Jun TowardEX Technologies, Inc. Technical Lead Network Design, Consulting, IT Outsourcing james@towardex.com Boston-based Colocation & Bandwidth Services cell: 1(978)-394-2867 web: http://www.towardex.com , noc: www.twdx.net
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:45 GMT-3