From: Joe Smith (j333smith@hotmail.com)
Date: Tue Aug 31 2004 - 17:28:51 GMT-3
That is the expected behavior on protected ports, since the hosts are on the
same VLAN/subnet, the layer 3 device does not get involved.
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12120ea2/3550scg/swtrafc.htm#wp1158863
Joe
>From: "Cocimano, Francesco" <FC183400@NCR.COM>
>Reply-To: "Cocimano, Francesco" <FC183400@NCR.COM>
>To: ccielab@groupstudy.com
>Subject: int vlan
>Date: Tue, 31 Aug 2004 19:10:19 +0200
>
>Hi all,
>I have configured protected ports in a 3550.
>
>I have two hosts in the vlan 10 and their switch`s ports are protected.
>
>I have enabled the layer 3 in the 3550
>
>If I ping from host A to host B I cannot get a success.
>
>If I disable the protected port I can ping through the layer 2 of 3550.
>
>I don`t understand why?
>
>any suggest?
>
>Many Thanks
>
>Francesco
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:51 GMT-3