From: gladston@br.ibm.com
Date: Tue Aug 31 2004 - 14:06:19 GMT-3
Thanks Bob and Carlos,
Here is the result of debug frame frag (or should I say "no result", eh,eh)
And the result of show fram pvc 302 with the full configuration.
No police. Maybe the version? (2500 with 12.2(1d))
r3#debu frame-relay fra ev
This may severely impact network performance.
You are advised to enable 'no logging console debug'. Continue?[confirm]
Frame Relay fragment event/errors debugging is on
r3#
r3#
r3#cl
Clear logging buffer [confirm]
r3#p
Protocol [ip]:
Target IP address: 172.16.23.2
Repeat count [5]:
Datagram size [100]: 700
Timeout in seconds [2]:
Extended commands [n]:
Sweep range of sizes [n]:
Type escape sequence to abort.
Sending 5, 700-byte ICMP Echos to 172.16.23.2, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
r3#sl
Syslog logging: enabled (0 messages dropped, 1 messages rate-limited, 0 flushes,
0 overruns)
Console logging: disabled
Monitor logging: level debugging, 0 messages logged
Buffer logging: level debugging, 68 messages logged
Logging Exception size (4096 bytes)
Trap logging: level informational, 71 message lines logged
Log Buffer (4096 bytes):
r3#
r3#show frame pvc 302
PVC Statistics for interface Serial0 (Frame Relay DTE)
DLCI = 302, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0.32
input pkts 66925 output pkts 16667 in bytes 4341773
out bytes 910493 dropped pkts 65 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
pvc create time 5d20h, last time pvc status changed 4d02h
Queueing strategy: weighted fair
Current fair queue configuration:
Discard Dynamic Reserved
threshold queue count queue count
64 16 0
Output queue size 0/max total 600/drops 0
fragment type end-to-end fragment size 500
cir 56000 bc 7000 be 0 limit 875 interval 125
mincir 28000 byte increment 875 BECN response no
frags 251 bytes 23536 frags delayed 244 bytes delayed 22909
shaping inactive
traffic shaping drops 0
r3#sh conf
!
interface Serial0
no ip address
encapsulation frame-relay
ip ospf network point-to-point
frame-relay traffic-shaping
frame-relay lmi-type cisco
!
interface Serial0.32 multipoint
ip address 172.16.23.3 255.255.255.0
frame-relay class Frame
frame-relay map ip 172.16.23.2 302 broadcast
!
interface Serial0.34 multipoint
ip address 172.16.34.3 255.255.255.0
frame-relay map ip 172.16.34.4 304 broadcast
!
interface Serial1
no ip address
shutdown
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:50 GMT-3