From: Carlos G Mendioroz (tron@huapi.ba.ar)
Date: Tue Aug 31 2004 - 13:51:11 GMT-3
Would you do a show frame pvc 301 and send the output ?
Better still, a full interface config dump ?
May be you are policing the packets ?
gladston@br.ibm.com wrote:
> Ping fails if the packet is bigger than the fragment size. Any Thoughts?
>
> r3(config-map-class)#frame-relay fragment 500
> r3(config-map-class)#
> r3#p 172.16.23.2
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 172.16.23.2, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 20/20/24 ms
> r3#p
> Protocol [ip]:
> Target IP address: 172.16.23.2
> Repeat count [5]:
> Datagram size [100]: 600
> Timeout in seconds [2]:
> Extended commands [n]:
> Sweep range of sizes [n]:
> Type escape sequence to abort.
> Sending 5, 600-byte ICMP Echos to 172.16.23.2, timeout is 2 seconds:
> .....
> Success rate is 0 percent (0/5)
> r3#
>
>
> r3#p
> Protocol [ip]:
> Target IP address: 172.16.23.2
> Repeat count [5]:
> Datagram size [100]: 400
> Timeout in seconds [2]:
> Extended commands [n]:
> Sweep range of sizes [n]:
> Type escape sequence to abort.
> Sending 5, 400-byte ICMP Echos to 172.16.23.2, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 56/59/60 ms
> r3#
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:50 GMT-3