From: Nico van Niekerk (nico@vanniekerk.co.za)
Date: Mon Aug 30 2004 - 23:23:17 GMT-3
> This is a very basic question regarding frame-relay mapping:
> Could anybody tell me why I get the following 2 map entries (in bold) ?
I was referring to the 1st 2 map entries... (bold doesn't work for txt)
Thanks for the reply Jonathan, I found that RIP placed the 1st 2 entries
After removing RIP, and reloading, they were gone.
>
> ******************************
> RouterA#sh frame map
> Serial0 (up): ip 0.0.0.0 dlci 200(0xC8,0x3080)
> broadcast,
> CISCO, status defined, active
> Serial0 (up): ip 0.0.0.0 dlci 100(0x64,0x1840)
> broadcast,
> CISCO, status defined, active
> Serial0 (up): ip 192.1.1.3 dlci 100(0x64,0x1840), dynamic,
> broadcast,, status defined, active
> Serial0 (up): ip 192.1.1.4 dlci 200(0xC8,0x3080), dynamic,
> broadcast,, status defined, active
> *******************************
>
> I don't have any static map statements under the interface.
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:50 GMT-3