Radius Authentication and Authorization question

From: Vazman@aol.com
Date: Mon Aug 30 2004 - 22:45:29 GMT-3

• Next message: Nico van Niekerk: "Frame-relay map"
• Previous message: Cisco Nuts: "RE: Cisco Press R&S Lab workbook - Clarification needed - ???"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello,

I need some clarificatin on Radius authentication and authorization.

I am working on a lab which needs requires device management via telnet to be authenticated with radius using AAA. Do I need to use authorization also? I know in radius, the server sends the authorization attribues along with the authentication accept message.

This is the config I have now and I can authenticate to the switch and also see it in the ACS reports. Do I need anything else. Thanks.

aaa new-model
aaa authentication login vty group radius local
!
username switch-telnet privilege 15 password 0 cisco
!
tacacs-server host 175.1.2.3 key cisco
!
line vty 0 4
 exec-timeout 0 0
 password cisco
 login authentication vty

• Next message: Nico van Niekerk: "Frame-relay map"
• Previous message: Cisco Nuts: "RE: Cisco Press R&S Lab workbook - Clarification needed - ???"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:50 GMT-3