From: Richard Dumoulin (Richard.Dumoulin@vanco.fr)
Date: Thu Aug 26 2004 - 13:33:38 GMT-3
See if you have another abr on the network and virtual links. If yes then
you might need to add the same area range command on this router,
--Richard
-----Message d'origine-----
De : Joseph Rothstein [mailto:ziutek@mac.com]
Envoyi : Thursday, August 26, 2004 6:21 PM
@ : ccielab@groupstudy.com
Objet : OSPF area range command
I'm sure that this has been discussed in the past sometime, but I cannot
find a link to search the archives, and the Cisco documentaiton doesn't seem
to make this clear either.
Waht I am wondering is if the area x range command needs to go on all the
routers in the specified area, or only on the ABR. Cisco documentation seems
to say that onyl on the ABR, but I have tried this, and it doesn't seem to
do it. In the routing table outside this area, I see the summary route as I
should, and all the more specific routes as well.
Please comment.
Joe
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:49 GMT-3