From: Emad ElDin Sedik (esedik@salec.com.eg)
Date: Tue Aug 24 2004 - 09:55:04 GMT-3
Thanx marc for ur reply , and pls find below what u asked about:
- Netscreen 204 model
- NetscreenOS version 4
- No I do not use DMZ ports as heart/beat ports.
Thanx again
Regards
Emad ElDin Sedik , BIT
---------------------------
Project manager
Salec Egypt
Saudi Egyptian Logistics and Electronics Company, S.A.E.
52, Gamaet El Dewal El Arabeya st,
Giza 12311, Egypt
Tel: +20(2) 7493518 Ext. 115
Fax: +20(2)7493517
URL: www.salec.com.eg
www.dabbagh.com
-----Original Message-----
From: marc van hoof [mailto:mvh@marcvanhoof.com]
Sent: Tuesday, August 24, 2004 3:49 PM
To: 'Emad ElDin Sedik'; ccielab@groupstudy.com
Subject: RE: NSRP
Last time I checked that wasn't on the syllabus for the CCIE lab exam...
And I'm guessing that since juniper bought netscreen, it's probably even
less likely to be added.
Having said that, what model netscreens ? and what version of ScreenOS ? and
are you using the DMZ ports as the heartbeat/failover ports ?
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Emad ElDin Sedik
> Sent: Tuesday, 24 August 2004 10:40 PM
> To: ccielab@groupstudy.com
> Subject: NSRP
>
> Dear all,
>
> I have two Netscreen boxes and I wanna configure NSRP between them but
> switching from the active one to the standby one takes at least three
> minutes , I did not find any parameter whether on the web or the command
> prompt that may enhance this very bad timing , is there anybody that can
> advice me in that?
>
>
>
> Thanx
>
> Emad
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:48 GMT-3