From: Scott Morris (swm@emanon.com)
Date: Tue Aug 24 2004 - 03:43:59 GMT-3
There's a reference under the part of Bridging --> Configuring Source-Route
Bridging.
Check out:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fibm
_c/bcfpart1/bcfsrb.htm#1003902
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, CISSP,
JNCIP, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Dean
Penebacker
Sent: Tuesday, August 24, 2004 2:27 AM
To: ccielab@groupstudy.com
Subject: DLSW+
I have no experience with DLSW+ except for my labs and I'm struggling to
find where you get the answer for this question from the IPexpert labs.
"Configure R1 to only allow SNA SAP's and deny all other SAP's to DLSw+
peers R5 and R6"
Where do I get the SNA SAP's? More specifically where do I get the "0x0000
0x0D0D" from the universe CD. I can't find it.
dlsw remote-peer 0 tcp 200.0.0.5 lsap-output-list 200
access-list 200 permit 0x0000 0x0D0D
Thanks for the help in advance.
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:48 GMT-3