From: Wam (ccnp2ccie@yahoo.com)
Date: Thu Aug 26 2004 - 20:22:04 GMT-3
Dean,
in case you haven't checked out following link..
it has link to list of common SAPs as well ..
http://www.cisco.com/en/US/partner/tech/tk331/tk336/technologies_tech_note09186a00800fad74.shtml
Understanding Service Access Point Access Control Lists
-Wam
Dean Penebacker <dean@penebacker.com> wrote:I have no experience with DLSW+ except for my labs and I'm struggling to
find where you get the answer for this question from the IPexpert labs.
"Configure R1 to only allow SNA SAP's and deny all other SAP's to DLSw+
peers R5 and R6"
Where do I get the SNA SAP's? More specifically where do I get the
"0x0000 0x0D0D" from the universe CD. I can't find it.
dlsw remote-peer 0 tcp 200.0.0.5 lsap-output-list 200
access-list 200 permit 0x0000 0x0D0D
Thanks for the help in advance.
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:49 GMT-3