RE: PPP over ATM using dialer interface

From: Swaroop Potdar (swarooppotdar@hotmail.com)
Date: Wed Aug 18 2004 - 04:35:08 GMT-3

HI Tim,

You can use browse through like this...so its easier to remember...

{Cisco IOS Release 12.2} ->

{ Cisco IOS Release 12.2 Configuration Guides and Command References} ->

{QC: Cisco IOS Quality of Service Solutions Configuration Guide,Release
12.2} ->

{ QC: Part 6: Link Efficiency Mechanisms} ->

{Configuring Link Fragmentation and Interleaving for Frame Relay and ATM
Virtual Circuits}

Or this is the direct link....

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos_c/fqcprt6/qcflfifr.htm#1002269

HTH
Swaroop.

>From: "ccie2be" <ccie2be@nyc.rr.com>
>Reply-To: "ccie2be" <ccie2be@nyc.rr.com>
>To: "Group Study" <ccielab@groupstudy.com>
>Subject: PPP over ATM using dialer interface
>Date: Tue, 17 Aug 2004 17:35:18 -0400
>
>Hi guys,
>
>If I can't remember the below config, is there anywhere on the Doc CD where
>I
>can find this?
>
>interface ATM1/0.306 point-to-point
> pvc 0/306
> encapsulation aal5snap
> protocol ppp dialer
> dialer pool-member 1
>
>
>
>interface dialer1
>
>ip addr x.x.x.x m.m.m.m
>
>encap ppp
>
>dialer pool 1
>
>
>
>
>
>Thanks in advance, Tim
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html

This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:45 GMT-3