From: john matijevic (matijevi@bellsouth.net)
Date: Tue Aug 17 2004 - 17:11:49 GMT-3
Hello Gladston,
It is not necessary to put bandwidth on the interface, but than again it
depends on what you are trying to accomplish. You can get VoFR to work
without putting the bandwidth command.
See the example for more information:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
fvvfax_c/vvfvofr.htm#1003799
Sincerely,
John Matijevic, CCIE #13254, MCSE, CNE, CCEA
Network Consultant
Hablo Espanol
305-321-6232
http://home.bellsouth.net/p/PWP-CCIE
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
gladston@br.ibm.com
Sent: Tuesday, August 17, 2004 3:33 PM
To: ccielab@groupstudy.com
Subject: Voice Bandwidth
As the command frame-relay voice bandwidth 64000 is required, would it
be necessary to set a bandwidth reference on serial 0/1.101, or would
the default be enough?
Int ser 0/1
Frame-relay traffic-shaping
!
int ser 0/1.101 point
frame-relay interface-dlci 101
class Voice
vofr cisco
!
map-class frame-relay Voice
frame-relay fair-queue
frame-relay voice bandwidth 64000
frame-relay fragment
!
dial-peer voice 1 pots
destination-pattern 2222
port 1/0/0
!
dial-peer voice 2 vofr
destination-pattern 3333
session target serial 0/1 101
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:45 GMT-3