Voice Bandwidth

From: gladston@br.ibm.com
Date: Tue Aug 17 2004 - 16:32:36 GMT-3

• Next message: john matijevic: "RE: Voice Bandwidth"
• Previous message: W Walla: "RE: Out of Band access for Cisco Router"
• Next in thread: john matijevic: "RE: Voice Bandwidth"
• Maybe reply: john matijevic: "RE: Voice Bandwidth"
• Maybe reply: trouse@cisco.com: "Re: Voice Bandwidth"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

As the command frame-relay voice bandwidth 64000 is required, would it be necessary to set a bandwidth reference on serial 0/1.101, or would the default be enough?

Int ser 0/1
 Frame-relay traffic-shaping
!
int ser 0/1.101 point
 frame-relay interface-dlci 101
  class Voice
  vofr cisco
!
map-class frame-relay Voice
 frame-relay fair-queue
 frame-relay voice bandwidth 64000
 frame-relay fragment
!
dial-peer voice 1 pots
 destination-pattern 2222
 port 1/0/0
!
dial-peer voice 2 vofr
 destination-pattern 3333
 session target serial 0/1 101

• Next message: john matijevic: "RE: Voice Bandwidth"
• Previous message: W Walla: "RE: Out of Band access for Cisco Router"
• Next in thread: john matijevic: "RE: Voice Bandwidth"
• Maybe reply: john matijevic: "RE: Voice Bandwidth"
• Maybe reply: trouse@cisco.com: "Re: Voice Bandwidth"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:44 GMT-3