From: thunai (thunai@cisco.com)
Date: Tue Aug 17 2004 - 11:44:15 GMT-3
Thanks for the Input. The Questions My OSPF router should all the routes
with out doing a redistribute connected. Just to finish the other part
of the LAB like BGP etc... i just did redistribute connected and
completed the LAB. I am not sure why that was not coming ... Any case i
will simiulte only this enviormnet and test. again.
Regds
Thunai
-----Original Message-----
From: Annu Roopa [mailto:annu_roopa@yahoo.com]
Sent: Tuesday, August 17, 2004 7:22 PM
To: thunai; 'ccie Meftahi'
Cc: ccielab@groupstudy.com
Subject: RE: ISIS & OSPF
Thunai,
Have u given "redistribute connected subnets" and if u are using
route-maps for filtering any connected routes..verify them. Once u give
the command maybe just do a clear ip ospf redis and see if it works. It
should.
HTH.
Annu.
thunai <thunai@cisco.com> wrote:
Hai
I my scenario , i have defined only IS-type Level2 I have done the
redistribution of Level2 routes in to OSPF.
Regds
Thunai
-----Original Message-----
From: ccie Meftahi [mailto:samccie2004@yahoo.co.uk]
Sent: Tuesday, August 17, 2004 10:42 AM
To: thunai
Subject: Re: ISIS & OSPF
did u use redistribute level1 and level 2 ?
thunai wrote:
Dear Group ,
I am working with ISIS & OSPF. The following is the
scenario.
R1-(e0)----(isis)--------(e0)--r2(s0)---------OSPF(FR)--------s0(r3).
R1 and R2 formed neighbors in ISIS , I have all the routes from r1
listed in r2 as ISIS routes.
R2 and R3 formed neighbors in OSPF , I have all the routes from R2
listed in R3 as OSPF routes
I have redistributed OSPF and ISIS on R2. I have all the ospf Routes in
R1.
However i have only the ethernet route ( where ISIS is running between
R1 and R2 ) is missing in R3. I did redistribute Connected to get that
route..
Can some body help me on this.issue..
Regds
Thunai
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:44 GMT-3