From: Annu Roopa (annu_roopa@yahoo.com)
Date: Tue Aug 17 2004 - 11:22:04 GMT-3
Thunai,
Have u given "redistribute connected subnets" and if u are using route-maps for filtering any connected routes..verify them. Once u give the command maybe just do a clear ip ospf redis and see if it works. It should.
HTH.
Annu.
thunai <thunai@cisco.com> wrote:
Hai
I my scenario , i have defined only IS-type Level2 I have done the
redistribution of Level2 routes in to OSPF.
Regds
Thunai
-----Original Message-----
From: ccie Meftahi [mailto:samccie2004@yahoo.co.uk]
Sent: Tuesday, August 17, 2004 10:42 AM
To: thunai
Subject: Re: ISIS & OSPF
did u use redistribute level1 and level 2 ?
thunai wrote:
Dear Group ,
I am working with ISIS & OSPF. The following is the
scenario.
R1-(e0)----(isis)--------(e0)--r2(s0)---------OSPF(FR)--------s0(r3).
R1 and R2 formed neighbors in ISIS , I have all the routes from r1
listed in r2 as ISIS routes.
R2 and R3 formed neighbors in OSPF , I have all the routes from R2
listed in R3 as OSPF routes
I have redistributed OSPF and ISIS on R2. I have all the ospf Routes in
R1.
However i have only the ethernet route ( where ISIS is running between
R1 and R2 ) is missing in R3. I did redistribute Connected to get that
route..
Can some body help me on this.issue..
Regds
Thunai
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:44 GMT-3