From: Joe Rothstein (ziutek@mac.com)
Date: Tue Aug 10 2004 - 15:51:37 GMT-3
This command would be primarily (and maybe only) used when trying to
form ISIS adjacencies over a FR connection with two different interface
types. Normally a p2p interface will not form an ISIS adjacency with a
multipoint interface. If you configure this on the multipoint interface
(a FR physical interface for example) you will then be able to form the
adjacency with the p2p. One previous way of doing this was to create a
GRE tunnel, and run isis over it.
Good luck to all,
Joe
On Tuesday, Aug 10, 2004, at 20:01 Europe/Berlin, Edwards, Andrew M
wrote:
> Group,
>
> I'm trying to figure out when to use the following interface command:
>
> Isis network point-to-point
>
> I know what the docCD says, but why would I want to convert broadcast
> to
> unicast flooding over broadcast media? Would this be like neighbor
> statements in RIP?
>
> andy
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
-- There is more to life than increasing its speed. - Mahatma GhandiJoseph Rothstein Ridlerstr. 32 80339 Munich Germany
ziutek@mac.com http://www.geocities.com/jozek444 http://www.rothstein.no-ip.org/ http://waywardgenuses.blogspot.com/ http://ziutek.journalspace.com/
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:40 GMT-3