From: Andy mrozek (andymrozek@yahoo.com)
Date: Fri Aug 06 2004 - 01:51:51 GMT-3
It didnt work on mine Ty without a dialer map ip
statement pointing it to itself .... it would ping
itself but if the bri was already connected to another
remote router it would drop that connection and then
when bri0:1 say went down at that point it would reply
to itself...... I am running 2600 with 12.2(15)T into
a 4 port vconsole isdn simulator...
--- tycampbell@comcast.net wrote:
> once the BRI is up, you can ping your own
> interface...I know...I have tested it :-)
>
>
> pinging your own interface if the BRI is down will
> not bring the interface up
>
>
> > Hi Andy,
> >
> > If you use a Dialer interface, you will find that
> you can ping yourself.
> > If you use the BRI, it doesnt work.
> >
> > :)
> >
> > Dan Sheedy
> >
> > ----- Original Message -----
> > From: "Andy mrozek" <andymrozek@yahoo.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Thursday, August 05, 2004 3:54 AM
> > Subject: ISDN layer 2 / 3 mapping to others and
> self
> >
> >
> > > If you want to be able to ping your self with a
> BRI
> > > isdn interface , would you map your own layer 3
> to one
> > > of your local DN's ? I have taken say R1 with 1
> bri
> > > interface and have the following:
> > >
> > > interface bri0/0
> > > description local DN is 2221
> > > ip address 192.168.1.2 255.255.255.0
> > > isdn switch-type basic-ni
> > > isdn spid1 4082221
> > > isdn spid2 4082222
> > > dialer-group 1
> > > encap ppp
> > > dialer map ip 192.168.1.1 name R1 broadcast
> 1111
> > > dialer map ip 192.168.1.2 name SELF broadcast
> 2221
> > > dialer map ip 192.168.1.3 name R3 broadcast
> 3331
> > >
> > > With the above I can ping all layer 3 addresses
> , but
> > > the links go up and down , I would suppose in
> the real
> > > world we wouldnt want that... So is there a
> different
> > > method to map your local IP to ???
> > >
> > >
> > >
> > > =====
> > > -Andy Mrozek
> > >
> > > There are only 10 types of people in this
> world...
> > > those who understand binary, and those who
> don't.....................
> > >
> > >
>
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:33 GMT-3