From: Pankaj
Date: Sun Aug 01 2004 - 12:31:06 GMT-3
Hello
I am wondering if someone can help
from my curent understanding the native vlan has to be the same on each side of the trunk.
is this topoplgy posible
R4 --- Sw1 --- R1
on R1
!
interface Ethernet0/0
no ip address
half-duplex
!
interface Ethernet0/0.1
encapsulation dot1Q 6 native
ip address 10.10.10.1 255.255.255.0
!
interface Ethernet0/0.2
encapsulation dot1Q 26
ip address 10.10.11.1 255.255.255.0
!
on S1
!
interface FastEthernet0/1
description connection to R1
switchport trunk encapsulation dot1q
switchport trunk native vlan 6
switchport mode trunk
no ip address
!
interface FastEthernet0/5
description connection to R4
switchport access vlan 6
switchport mode access
no ip address
!
interface Vlan6
ip address 10.10.10.2 255.255.255.0
!
on R4
!
interface Ethernet0
ip address 10.10.10.3 255.255.255.0
!
I can not ping from R1 to R4...or R1 to vlan 6 on S1....any ideas
How do i attach more hosts/routers to vlan 6 successfully ?
Best Regards
Pankaj
---------------------------------
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:31 GMT-3