From: marc van hoof (mvh@marcvanhoof.com)
Date: Thu Jul 29 2004 - 12:21:52 GMT-3
Ppp multilink = enable ppp multilink support on the interface
Dialer load-threshold xx = required link load (out of 255) to bring up
another channel to add to the multilink bundle.
If you're in doubt, you probably need both.
-marc.
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Joseph D. Phillips
> Sent: Friday, 30 July 2004 1:10 AM
> To: ccie2be; Richard Dumoulin; Group Study
> Subject: Dialer load threshhold vs. ppp multilink
>
> Can someone explain what the difference is between dialer load-thresh
> and ppp multi? Are they mutually exclusive, if you have ppp configured
> anyway?
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:05 GMT-3