From: marc van hoof (mvh@marcvanhoof.com)
Date: Thu Jul 29 2004 - 03:38:56 GMT-3
my understanding is that it will take it to UP/Down and that will be
sufficient for a backup interface to kick in ?
-----Original Message-----
From: Brian Dennis [mailto:bdennis@internetworkexpert.com]
Sent: Thursday, July 29, 2004 4:36 PM
To: marc van hoof; thunai; ccielab@groupstudy.com
Cc: security@groupstudy.com
Subject: RE: Frame-relay interface Tracking
Frame Relay end-to-end keepalives can not bring down a physical
interface.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
marc van hoof
Sent: Wednesday, July 28, 2004 11:27 PM
To: 'thunai'; ccielab@groupstudy.com
Cc: security@groupstudy.com
Subject: RE: Frame-relay interface Tracking
check out frame relay end-to-end keepalive...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
thunai
Sent: Thursday, July 29, 2004 4:17 PM
To: ccielab@groupstudy.com
Cc: security@groupstudy.com
Subject: Frame-relay interface Tracking
Dear All ,
I have the following scenario.
R1--------(fr)--------r2 . ( R1 connects to R2 using framerelay
Physical interface )
When i shutdown r2 serial interface still on R1 my serial link is
Up , UP , Ofcourse my PVC is down . When i do a backup interface on the
serial for isdn dial , isdn is not kicking since the interface is Up. Is
there a way in Framerelay where we can track the end to end PVC like ATM
we can use to OAM to track the pvc status. I can make it working using
watch group , i am trying for an option to make it work with backup
interface.
Regds
Thunai
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:05 GMT-3