From: kane6dec (kane6dec@yahoo.com)
Date: Thu Jul 29 2004 - 02:50:41 GMT-3
queueing counters are strange.
why?
-------------------------------
queue-list 1 protocol ip 1 list 120
queue-list 1 protocol ip 2 list 121
queue-list 1 default 0
queue-list 1 queue 1 byte-count 512
queue-list 1 queue 2 byte-count 5120
access-list 120 permit tcp any any eq telnet
access-list 121 permit icmp any any
-------------------------------
Protocol [ip]:
Target IP address: 160.6.12.1
Repeat count [5]: 1000
Datagram size [100]: 1500
Timeout in seconds [2]:
Extended commands [n]:
Sweep range of sizes [n]:
Type escape sequence to abort.
Sending 1000, 1500-byte ICMP Echos to 160.6.12.1, timeout is 2 seconds:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
~~~~~~
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!
Success rate is 100 percent (1000/1000), round-trip min/avg/max = 380/381/400 ms
----------------------------
r4(config-if)#do sh queuein int s0/0
Interface Serial0/0 queueing strategy: custom
Output queue utilization (queue/count)
0/25 1/0 2/1 3/0 4/0 5/0 6/0 7/0 8/0
9/0 10/0 11/0 12/0 13/0 14/0 15/0 16/0
-----------------------------
Queue 2 is icmp traffic.
I wondered why counter2 is "1".
---------------------------------
Yahoo! Messenger - Communicate instantly..."Ping" your friends today! Download Messenger Now
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:05 GMT-3