From: gladston@br.ibm.com
Date: Tue Jul 27 2004 - 09:23:06 GMT-3
Am I missing something or these docs say opposite things about the same command:
"The max-reserved bandwidth command is intended for use on main interfaces only; it has no effect on virtual circuits (VCs) or ATM permanent virtual circuits (PVCs)."
from 'Low Latency Queueing with Priority Percentage Support', 12.2(2)T New Feature
(http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t2/ftllqpct.htm)
"You now can increase the maximum reservable bandwidth value on ATM PVCs using the max-reserved-bandwidth command"
from 'Comparing the bandwidth and priority Commands of a QoS Service Policy'
(http://www.cisco.com/en/US/tech/tk543/tk757/technologies_tech_note09186a0080103eae.shtml)
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:04 GMT-3