From: Geert Nijs (geert.nijs@simac.be)
Date: Mon Jul 19 2004 - 09:52:29 GMT-3
I know there are two versions of this: the cisco-legacy-inline-power form and the new, standards based 802.3af PoE Power Over Ethernet. I am looking for compatability issues here (is a 802.3af device going to work on a cisco inline-power device ?)
Also, the Catalyst 3550-24-PWR supports Cisco-inline-power.
The new Catalyst 3560 supports the new 802.3af Power over Ethernet.
Does the 3350 also support 802.3af PoE ?? Will he support this in the future (with an upgrade ?)
Or is it a hardware issue and will the C3550 never support 802.3af ??
I have been looking on the Cisco site, but not much information here....
any ideas are welcome,
mvg,
Geert Nijs
#####################################################################################
This e-mail and any attached files are confidential and may be legally privileged.
If you are not the addressee, any disclosure, reproduction, copying, distribution,
or other dissemination or use of this communication is strictly prohibited.
If you have received this transmission in error please notify Simac immediately
and then delete this e-mail.
Simac has taken all reasonable precautions to avoid virusses in this email.
Simac does not accept liability for damage by virusses, for the correct and complete
transmission of the information, nor for any delay or interruption of the transmission,
nor for damages arising from the use of or reliance on the information.
All e-mail messages addressed to, received or sent by Simac or Simac employees
are deemed to be professional in nature. Accordingly, the sender or recipient of
these messages agrees that they may be read by other Simac employees than the official
recipient or sender in order to ensure the continuity of work-related activities
and allow supervision thereof.
#####################################################################################
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:58 GMT-3