From: Scott Savage (rolande23@sbcglobal.net)
Date: Thu Jul 15 2004 - 13:44:06 GMT-3
The requirement is to send UNICAST updates. PBR would
only change the next hop ip which would affect where
the packet would be sent to at layer 2 based on the
routing table lookup. If you want the update to be
unicast, you have to NAT the destination IP address
whether it is multicast or broadcast.
--- trouse@cisco.com wrote:
> Guys can you PBR multicast and broadcast?
>
> Trying to send UNICAST RIP UPDATES without using
> neighbor command, NAT or anything special just PBR.
> Will it work? if not why now?
=====
-- Scott Savage
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:56 GMT-3