Re: QoS: Setting CoS on dot1Q Trunk to IP-Phone

From: Harald Mayr (haraldmayr@yahoo.de)
Date: Thu Jul 15 2004 - 12:47:19 GMT-3

• Next message: TiuN Hong Leng: "How to turn off SSH in IOS?"
• Previous message: trouse@cisco.com: "PBR w/ MULTICAST and BROADCAST"
• Maybe in reply to: Harald Mayr: "QoS: Setting CoS on dot1Q Trunk to IP-Phone"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Scott,

well, the instructions told me to change the CoS value for the voice
traffic.

Thanks for your help, I appreciate it!

regards,
Harald

Scott Savage wrote:
> Are you not allowed to change the CoS value of the
> data traffic? If that isn't a restriction then keep it
> simple...
>
> mls qos
> interface fa0/1
> mls qos cos 1
> mls qos cos override
>
> That will set the CoS to 1 for all tagged and untagged
> frames coming in the interface including Voice.
>
> --- Harald Mayr <haraldmayr@yahoo.de> wrote:
>
>>Hello Group,
>>
>>I have a 3550 here running a 12.1(19)EA1a image. I
>>want to configure one
>>of its FastEthernet ports as a dot1Q trunk towards
>>an IP Phone.
>>
>>There should be separate VLANs for Voice and Data
>>traffic.
>>
>>What I want to do now is to assign CoS value of 1 to
>>the Voice traffic.
>
>
>
> =====
> --
> Scott Savage
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

• Next message: TiuN Hong Leng: "How to turn off SSH in IOS?"
• Previous message: trouse@cisco.com: "PBR w/ MULTICAST and BROADCAST"
• Maybe in reply to: Harald Mayr: "QoS: Setting CoS on dot1Q Trunk to IP-Phone"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:56 GMT-3