From: Geert Nijs (geert.nijs@simac.be)
Date: Tue Jul 13 2004 - 07:13:17 GMT-3
Hi group,
The PPP protocol uses LCP keepalive packets to verify a PPP session for
connectivity.
I was wondering if you can specify the LCP keepalive interval somewhere,
or specify how many LCP packets can be dropped, before the PPP
connection is considered down.
I don't think the "keepalive" command refers to LCP keepalive packets:
Int s0/0
Encap ppp
Keepalive 5 <-- is this LCP
keepalive on a PPP connection ?
Geert
#############################################################################
########
This e-mail and any attached files are confidential and may be legally
privileged.
If you are not the addressee, any disclosure, reproduction, copying,
distribution,
or other dissemination or use of this communication is strictly prohibited.
If you have received this transmission in error please notify Simac
immediately
and then delete this e-mail.
Simac has taken all reasonable precautions to avoid virusses in this email.
Simac does not accept liability for damage by virusses, for the correct and
complete
transmission of the information, nor for any delay or interruption of the
transmission,
nor for damages arising from the use of or reliance on the information.
All e-mail messages addressed to, received or sent by Simac or Simac employees
are deemed to be professional in nature. Accordingly, the sender or recipient
of
these messages agrees that they may be read by other Simac employees than the
official
recipient or sender in order to ensure the continuity of work-related
activities
and allow supervision thereof.
#############################################################################
########
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:53 GMT-3