From: Jose Mujica (jose.mujica@netxar.com)
Date: Wed Jul 07 2004 - 17:38:43 GMT-3
Does anybody knows the exact pinout for the NM-1ATM-25 card? In order to make
an ATM Cross cable??
TIA,
-Jose
On Wed, 7 Jul 2004 15:46:35 -0400, Jose Mujica wrote
> HI.
>
> I have two 2600 routers each with an NM-1ATM-25 atm card. I would
> like to do a back-to-back configuration but the interface still down,
> down. I look at CCO sample configs and I'm using exactly the same
> configuration without any luck.
>
> I'm using 12.2(15)T12 on both routers... Here the configuration I'm using:
>
> R1:
>
> interface ATM1/0
> ip address 192.168.1.20 255.255.255.0
> map-group atm-in
> atm clock INTERNAL
> atm pvc 1 1 5 aal5snap
> atm ilmi-keepalive
> no atm address-registration
> !
> map-list atm-in
> ip 192.168.1.10 atm-vc 1 broadcast
> !
>
> R2:
>
> interface ATM1/0
> ip address 192.168.1.10 255.255.255.0
> map-group atm-in
> atm clock INTERNAL
> atm pvc 1 1 5 aal5snap
> atm ilmi-keepalive
> !
> map-list atm-in
> ip 192.168.1.20 atm-vc 1 broadcast
> !
>
> I tried with standard ethernet cables (i.e. straight and cross
> cables)..
>
> Am I missing something else?
>
> Thanks in advanced,
> -Jose
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:48 GMT-3