From: Karim (karim_ccie@hotmail.com)
Date: Wed Jul 07 2004 - 16:37:33 GMT-3
I am trying to access via console. Here you are the config. :
aaa new-model
aaa authentication dot1x default group radius
enable password cisco
!
line con 0
exec-timeout 0 0
Regards,
Karim.
----- Original Message -----
From: "Kenneth Wygand" <KWygand@customonline.com>
To: "Karim" <karim_ccie@hotmail.com>; <ccielab@groupstudy.com>
Sent: Wednesday, July 07, 2004 10:29 PM
Subject: RE: AAA authentication... affecting login ????
?
Karim,
I believe that if you have local authentication configured on the line, that
will supercede the AAA login configuration commands, but I'm not 100% sure
of this.
Can you post your AAA and access line configuration?
Thanks!
Ken
________________________________
From: nobody@groupstudy.com on behalf of Karim
Sent: Wed 7/7/2004 3:22 PM
To: ccielab@groupstudy.com
Subject: AAA authentication... affecting login ????
Hi all,
I am asking about something might seem trivial here but it is confusing me!
If configuring "aaa authentication dot1x default group radius" or "aaa
authentication ppp default group radius", I thought that I have to add "aaa
authentication login none" just to be able to access the switch. But I am
trying to practice it now, adding the aaa authentication dot1x default group
radius ONLY didn't avoid logging to the switch.
Is this normal ?? thanks for anyone clarification......
Regards,
Karim.
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:48 GMT-3