From: john matijevic (matijevi@bellsouth.net)
Date: Sun Jul 04 2004 - 20:26:44 GMT-3
Hello Luwig,
I just did a simple search on google for bandwidth. And I came up with
the following: http://www.microcodz.com/, this tool seems to measure
based on ip address, you can give the port on the catalyst an ip address
and measure that way. There are many other products as well you may be
able to try and demo a few first before you decide to purchase.
Sincerely,
John Matijevic, CCIE #13254, MCSE, CNE, CCEA
Network Consultant
Hablo Espanol
305-321-6232
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ludwig Morales
Sent: Sunday, July 04, 2004 4:41 PM
To: ccielab@groupstudy.com
Subject: bandwith usage
Hi group!!
Is there actually a way to measure the bandwith been used on a
specific port
of a catalyst 3500 series switch, i was using prtg but i'm not sure
about the
results im getting from this tool, is there a way to verify bandwith
usage
trough the CLI (wich command should i use?) or is there any other tool
i can
use.
Thanks for your help, really appreciate it!!
Regards,
Ludwig
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:47 GMT-3