From: Tom Rogers (cccie71@yahoo.com)
Date: Sun Jul 04 2004 - 13:14:48 GMT-3
MD,
As Rich pointed out, you cannot change AD of selected external eigrp routes, but you can for internal. Use distance eigrp <AS#> <Distance> command.
2ndly as Richard pointed out another option off raising AD of another routing protocol.
Tom
MD <ccievision@yahoo.com> wrote:
Has anybody tested reducing the AD of external EIGRP routes from 170 to some other value (say 91).
I have tried the distance command under EIGRP but it changes the distance only for internal eigrp routes and not external eigrp routes.
Here is the relevant configs...
router eigrp 318
redistribute eigrp 300 route-map 300to318
offset-list 99 in 20 Serial0
network 172.16.123.0 0.0.0.31
neighbor 172.16.123.1 Serial0
neighbor 172.16.123.4 Serial0
distance 91 172.16.123.1 0.0.0.0 98
distance 91 172.16.123.4 0.0.0.0 97
no auto-summary
!
access-list 97 permit 10.2.4.0 0.0.3.255
access-list 98 permit 172.16.15.0 0.0.0.15
SH IP ROUTE
D EX 172.16.15.0/28 [170/46738176] via 172.16.123.1, 00:00:07, Serial0
D 10.2.4.0/22 [91/46251776] via 172.16.123.4, 00:25:30, Serial0
FYI-- 172.16.123.1 is sending external EIGRP routes and 172.16.123.4 is sending internal EIGRP routes and I am trying to make both these routee to show up with AD 91 in the routing table.
thanks,
MD
---------------------------------
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:46 GMT-3