From: Dmitry Volkov (dmitry.volkov@rogers.com)
Date: Sun Jun 27 2004 - 12:08:25 GMT-3
I think You can use this:
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guid
e09186a00801d1e95.html
"to route the traffic over the correct pvc and then failover to the other in
case of failure."
Dmitry
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On
> Behalf Of Nir Wittenberg
> Sent: Friday, June 25, 2004 7:06 PM
> To: ccielab@groupstudy.com
> Subject: policy routing via OSPF
>
>
> I have a HQ site with two routers and a remote site with one
> Frame Relay
> T1 with a pvc connection to each HQ router. All are in the same OSPF
> area. I want data to travel over one pvc and voice to travel on the
> other. Voice and data are on separate networks. How can I
> use ospf to
> route the traffic over the correct pvc and then failover to
> the other in
> case of failure.
>
>
>
> Need a little refresher.
>
>
>
> Nir
>
> CCIE 12261
>
> _______ voice and
> data vlans______
>
> |
> |
>
> HQ1
> HQ2
>
> \
> /
>
> \
> /
>
> \
> /
>
> \
> /
>
> \
> /
>
> \
> /
>
> \
> /
>
>
> \
> /
>
>
> R1
>
>
> |
>
> _______
> voice and data
> vlans______
>
> ______________________________________________________________
> _________
> Please help support GroupStudy by purchasing your study
> materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:51 GMT-3