From: Kenneth Wygand (KWygand@customonline.com)
Date: Tue Jun 22 2004 - 11:39:53 GMT-3
Tim,
How about providing a static route on R5 pointing to the Loopback
interface on the 3550. Then NAT all traffic on R5 destined for the
3550's Loopback interface through E0/1 to the IP address on its E0/1
interface, which the 3550 will see as directly connected.
If you need your 3550 to be able to initiate pings to other addresses
and you are not allowed a static default, you can do that by disabling
IP routing and providing a default gateway to R5's E0/1 (provided the
rules allow this).
Kenneth E. Wygand
Systems Engineer, Project Services
CISSP #37102, CCNP, CCDP, ACSP, Cisco IPT Design Specialist, MCP, CNA,
Network+, A+
Custom Computer Specialists, Inc.
"The only unattainable goal is the one not attempted."
-Anonymous
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie2be
Sent: Tuesday, June 22, 2004 10:10 AM
To: Group Study
Subject: Routing without routing protocol
Hi All,
This one got me.
3550 has routing enabled but no routing protocols enabled.
It's only path to the rest of the network is via R5. All other routers
on the
other side of R5 must be able to ping the 3550's loopback.
I'm allowed to use one static route on R5.
This is what it looks like:
3550 lo0 fa0/5 ------- e0/1 R5 ----- rest of network
How do I provide reachabiltiy to the 3550's lo0 without violating lab
rules ie
no default routes or default networks and
no static routes except the one explicitly allowed here?
Please tell me what I'm missing. Thanks, Tim
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:46 GMT-3